MDMAXCRPROA
MDMAXCRPROA
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these instructions in a
safe, accessible place.
Caution: To help prevent personal injury
Never use this tool for any application other than for which it was
designed.
Never alter or modify this tool in any way. Improper operation
and/or maintenance of the tool, or modification of the tool could
result in serious injury or death.
Do not begin repairs without assurance that vehicle is in secure
position, and will not move during repair.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MDMAXCRPROA (FCC ID: 2AUKMMAXCRPROA) has been evaluated
to meet general RF exposure requirement.
INTENDED USE OF THE TOOL
This tool is designed as a code reader for professional technicians or
DIYers.
Do not use this tool outside of the designed intent. Never modify the
tool for any other purpose or use.
Made in China
to Matco specifications
PRODUCT INFORMATION
Slim design with 4 inch color screen and Android platform.
Multilingual support and wireless update.
Only compatible with passenger cars with 12V voltage.
WARNING
Page 2 2101026
-
16
Page 1 2101026
-
16
FCC Statement
Maximus
Code Reader PROA
Maximus
Code Reader PROA
