HG300
1
rev. 04/23/04
Listed
16C6
• Operating Instructions
• Warning Information
HG300
Heat Gun
Voltage: 120 V, 60Hz
Wattage:
1400 W
Variable Temperature:
Turn knob to select temperature up to 1050° F
3 Stage Switch:
I. Cool air only, 140° F
II. Low air, variable temperature
III. High air, variable temperature
SPECIFICATIONS
UL Warning
Read this instruction book before using. To reduce risk of fire
or electric shock, do not expose to rain or moisture. Store
indoors. When servicing, use only identical replacement
parts. When using double insulated electronic tools, basic
safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury. The heat gun
operates at up to 1050
°
F with no visual indication of
temperature (no flame). The hot air stream at the outlet of
nozzle will burn flesh. Do not turn on heat gun with hand
in front of nozzle.
DO NOT USE NEAR
combustible
LIQUIDS
.
DO NOT USE FOR:
Heating gas engines,
heating car batteries, thawing refrigerator equipment.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
TOOL
ALWAYS WEAR
SAFETY GOGGLES
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains
chemicals known to cause cancer,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks
and cement and other masonry
products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work
with approved safety equipment,
such as those dust masks that are
specially designed to filter out
microscopic particles.
hg300_man042304 4/23/04 4:43 PM Page 1
