WARNING
BEFORE USE
Study, understand and follow all instructions provided
with this product. Read these instructions carefully before
installing, operating, servicing, or repairing this tool. Keep
these instructions in a safe, accessible place.
INTENDED USE OF THE TOOL
The manufacturer warrants this product to the original user
against defective material or workmanship for a period of 1
year from the date of purchase.
The manufacturer reserves the right to determine whether
the part or parts failed because of defective material,
workmanship or other causes. Failures caused by accident,
alteration or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty free of charge. Repairs
or replacements of products covered under this warranty are
warrantied for the remainder of the original warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the product
by unauthorized service representatives voids this warranty.
The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness
for a particular purpose. Some states do not allow the
exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
1 YEAR LIMITED WARRANTY
Page 1
BG6QD
6 PIECE HIGH FLOW
QUICK DISCONNECT
BLOW GUN KIT
1708295-14
PRODUCT INFORMATION
Made in Taiwan
to Matco specifications
Before use,
READ AND UNDERSTAND THE WARNINGS ON
PAGE 1
and check the parts diagram and part number listing
on page 4 to make sure all parts are included. If any parts are
missing or damaged, please call your distributor.
WARNING
Caution: To help prevent personal injury
•
Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear appropriate
safety equipment and clothing when using this product.
Study, understand and follow all instructions provided with
this product. Failure to read and follow all warnings and
operating instructions may result in damages and serious
injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and bystanders).
• Never use this tool for any application other than for which
it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size and
design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
•
Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
DO NOT DISCARD – GIVE TO USER
The kit is made for use as a blow gun to blow away dust,
debris and moisture from work materials and surfaces. Only
use with the included attachments. Do not block the passage
of air while in use.
Interchangeable.
Choose between 4 different attachment
types and lengths and 6 different angles.
Quick release.
Simply rotate spring-loaded
lock collar either direction to release or lock
and seal attachments.
Durable.
Impact nylon fiber reinforced
construction and 220psi max pressure rating.
SPECIFICATIONS:
Air Inlet: Brass
Air Inlet Tread: 1/4" PT or 1/4" NPT
Working Pressure: 160psi
Max Pressure: 220psi
Air Consumption (80psi): 10CFM
(up to 13CFM output)
Temperature Range: -20°C to 85°C (-4°F to 185°F)
Brass Inlet
Six Angles
6
Quick Release
Turn
OPEN
