1.3 Interface and Connectors
7
1.3
Interface and Connectors
1.3.1
Front panel of Box
The MatchX Box lower shell can be removed to connect cables and check the status of the Box.
The panel has USB, USB-C and POE connectors and Link status LED.
USB2.0 is used to connect USB disk.
USB-C can be used to debug the Box.
Ethernet port supports 24V passive POE, please pay attention to the voltage rating of the POE
injector.
1.3.2
Link activity of Box
The Box uses one RGB LED to indicate the activity of the connections. The Table 1.2 describes the
LEDs on the Box
