by
03MM-BIGRAY
Antenna B3 Horizontal / Vertical 16 Element Phased Array plus balun
Step 1
Swing out both Tie Brackets to 90°.
Step 1.2
For Vertical Signal attach the mast clamp at middle position on the centre boom.
Step 2
Hold centre boom over boom leg at hole
positions 2 & 3. Align the notch part of the tie
bracket with the boom leg. Then clip parts together.
Insert 4.8x32mm screw trough tie bracket fasten
with spring washer and wing nut.
Step 4
Attach the tie bracket / mast clamp at hole
position 1. Insert 4.8x32mm screws through tie
bracket then fasten using spring washer & wing nut.
Step 5
Attach tie bracket at hole position 4
Insert 4.8x32mm screws through tie bracket fasten
using spring washer and wing nut
Step 6
Attach cable to connection points shown
Step 7
Swing-out element tubes unit they
click-lock with the No.63 plastic at 90
°
position
final check all parts with assembly drawing before
installing Antenna
Step 4.1
For horizontal signal option
attach mast clamp/U-bolt kit onto tie bracket as
shown.
Folded Position Shown
Tie Bracket
90
°
5mm Connection Hole
Mast clamp mounting
shown for vertical signal
CENTRE BOOM ASS’Y - Plan View
90
°
Step 3
Repeat Step No. 2 to attach 2nd boom leg
Panhead Screw
4.8x32mm
Element Tube
Centre Boom
Tie Bracket
Notch
Plastic No.63
Boom Leg
Mast Clamp
Spring Washer
Wing Nut
VIEW “A”
VIEW “A”
VIEW “A”
Clamp attachment for
horizontal signal mounting
Tie Bracket
Hole Position 4
Hole Position 3
Balun Connections
Centre Boom Ass’y
Hole Position 2
Hole Position 1
Tie Bracket/Mast Clamp - Ass’y
Boom Leg Phase-bar - Ass’y
Plastic No.63
Boom Leg Ass’y
U-bolt/mast clamp
- Assembly position for
BIGRAY Horizontal
Mounting
U-bolt/mast clamp
assembly position for
BIGRAY Horizontal
Mounting
U-bolt/mast clamp
- Assembly position for
BIGRAY Vertical Mounting
Balun 05MM-TV4F
VIEW
“A”
Boom Leg
Element Tube
Note: Element Tubes
Face away from centre
Plastic No.63
VIEW “A”
For any technical enquiries, call our technical department at Matchmaster on
1800-AERIAL
(1800-237425)