MW8002
Rev 00.00
Page 12 of
25
©| AES Industrial Supplies Ltd | 2019 all rights reserved
Unauthorized reproduction of this manual is prohibited
.
MW8002 Welding Fume Extractor
Par
Description
1
Use and general characteristics
Use
The MW8002 welding fume extractor series are particularly suitable to be used in businesses where the
welding operation is occasional and still in the presence of low concentrations of fumes, i.e. for those who, for
reasons dictated by their activity, must perform welding at an address of third where the need to transport the
purifier is a primary requirement. With the latest regulations for this type of use exhaust fans located at the
auto repair shop to clean up the welding fumes.
