Installation Instructions
Installation Instructions
Loss of vehicle control involves risk of death or serious injury, particularly to parts of your body not
restrained within vehicle. This product is intended for weather protection only and should not be relied upon
to contain occupants in the event of an accident or to protect from either ground contact or falling objects.
To reduce risk of accident or injury:
•
ALWAYS WEAR SEATBELTS
•
Always keep head, arms & body parts within vehicle.
•
Fully secure or stow the soft top before driving according
to instructions. Never try to latch or fold soft top while
driving. Do not use if damaged or worn.
•
Read and follow all instructions & warnings accompanying
this product, in your vehicle owner’s manual and Off Road
Driving Supplement.
RISK OF EYE INJURY. Safety glasses should be worn at all times while installing or maintaining
this product.
SkyMaster™ Freedom Panel Replacement Soft Top
for 2007-2018 Jeep
®
Wrangler JK/JKU
Item # 158004XX
This Freedom Panel kit is designed to fit on your Factory hard top installed JK Jeep
®
Wrangler. Before beginning
your installation of this product, you will need to remove your existing Hard Top Freedom Panels. All pictures
shown in this instruction sheet are of a 4 door JK Wrangler. The Steps and installation for 2 Door JK Wrangler
will be the same. When installing this product, we highly recommend that you have two people as the
Deck/Header Assembly is quite large and is somewhat difficult to handle and maneuver with only one person.
Parts List:
A) Deck/Header Assembly QTY 1
B) Driver’s Side Door Surround QTY 1
C) Passenger’s Side Door Surround QTY 1
D) Door Surround Knobs QTY 4
E) Side Tube Brackets QTY 2
F) Hardware Pack QTY 1
Required Tools:
Safety Glasses
Razor Knife or Scissors
Phillips Head Screwdriver
5/32” Allen Head Driver
9/16” Socket Wrench & Driver
9/16” Wrench
MT_JK_FREEDOM_PANEL_TOP_LTR.qxp_Layout 1 5/8/20 6:51 PM Page 1