4
INSTALLATION
Unpacking and Inspection
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should
have received the following items inside of package:
Inverter unit Manual software CD RS-232 cable DC Fuse
Preparation
Before connecting all wirings, please take off bottom cover by removing two screws. When removing the
bottom cover, be carefully to remove one cable as shown below.
Mounting the Unit
Consider the followings before selecting your placements:
Do not mount the inverter on flammable construction
materials.
Mount on a solid surface
Install the inverter at eye level in order to allow easy
LCD display readout.
For proper air circulation and heat dissipation, allow a
clearance of approx. 20 cm to the side and approx. 50
cm above and below the unit.
The ambient temperature should be between 0°C and
55°C to ensure optimal operation.
The recommended orientation is to adhered to the
wall vertically.
Be sure to keep other objects and surfaces as shown
in the diagram to guarantee sufficient heat dissipation
and to have enough space for wirings.
SUITABLE FOR MOUNTING ON CONCRETE OR
OTHER NON-COMBUSTIBLE SURFACE ONLY.