C. CURRENT CODE DISPLAY
1.
Press and hold the Device button for 5
seconds.
2.
When the button is released it will start to
flash; press and release the -/-- key within 8
seconds.
3.
After a few seconds, the light indicator
produces 4 series of flashes, with a pause
between each series, corresponding to the
current code. Count the number of flashes;
each series of flashes corresponds to one
figure in the code. 10 flashes stand for 0.
4.
Make a note of the code on the adhesive
label inside the battery cover for quick and
easy future reprogramming.
N.B. This operation cannot be interrupted and
the remote control cannot therefore be used
until the end of the 4 series of flashes.
