11
12
20V max* LIThIUM-ION COMpACT CORdLeSS IMpACT WReNCh - 054-3121-6
20V max* LIThIUM-ION COMpACT CORdLeSS IMpACT WReNCh - 054-3121-6
oPERA
tin
G
in
St
Ru
Ction
S
on/oFF trigger switch
(fig 2)
To turn the cordless impact wrench ON, depress
the trigger switch. To turn it OFF, release the trigger
switch.
Variable speed
(fig 2)
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
Direction-of-rotation selector
(forward/centre-lock/reverse)
(fig 2, 3)
The direction-of-rotation is reversible and is
controlled with a selector located above the trigger
switch. With the cordless impact wrench held in
normal operating position:
position the direction-of-rotation selector to the left
of the tool for forward rotation. The forward/reverse
Led indicator on the impact wrench will shine green
(fig 3b).
position the direction-of-rotation selector to the
right of the tool for reverse rotation. The forward/
reverse Led indicator on the impact wrench will
shine red (fig 3b).
position the direction-of-rotation selector in the
centre to lock the tool off.
NOTE:
The cordless impact wrench will not run
unless the direction-of-rotation selector is engaged
fully to the left or right.
LED Worklight
(fig 4)
The Led worklight, located on the base of the
cordless impact wrench will illuminate when the
trigger switch is depressed. This provides additional
light on the surface of the workpiece for operation in
lower light situations. The Led worklight will turn off
when the trigger switch is released.
Electric brake
To stop the tool, release the trigger switch and allow
the anvil to come to a complete stop. The electric
brake quickly stops rotation. This feature engages
automatically when you release the trigger switch.
Bit clip
(fig 5)
When not in use, a bit (available separately) may be
stored on either side of the cordless impact wrench
by snapping it into place in the bit clip.
installing and removing a
socket
(fig 6)
1. Lock the trigger switch by placing the direction-
of-rotation selector in the OFF (centre) position.
2. To install a 1/2" socket (available separately),
simply push it completely onto the anvil. To
remove, pull it off of the anvil.
WARNING!
Bits, sockets and tools get hot during operation. Wear gloves when touching them after use.
WARNING!
Only use sockets designed for impact wrenches. Sockets not designed for impact wrenches
could break and result in user injury. Inspect sockets prior to use to ensure that they have no
cracks or other visible damage.
fig 2
direction-of-rotation
selector
Variable speed
trigger switch
fig 3a
Forward
Reverse
oPERA
tin
G
in
St
Ru
Ction
S
fig 4
Led Worklight
fig 6
fig 5
Bit clip
fig 3b
Green
Red
