background image

1

18 VOLT CORDLESS 1.5 CFM, 2 STAGE VACUUM PUMP  

OPERATION MANUAL 

Oil Refill Cap

Oil Sightglass

Oil Drain

Reinforced Base

LED Indicator

ON/OFF Switch

18 Volt DC Li-ion battery

Sure Grip Handle

18 Volt DC Li-ion battery 
adapter sleeve

Inlet Ports

FEATURES

•  Equipped with our exclusive oil mist free exhaust port
•  Sure-Grip handle, ergonomically designed for superior comfort and portability
•  Reinforced base provides extreme shock resistance
•  Air cooled motor design allows for operation under high temperature conditions
•  Pump runs with extremely high ultimate vacuum and low noise
•  Accessible oil drain port & sight glass make both oil maintenance and accuracy easy
•  Built-in device eliminates oil mist and an oil-gas separator at the air exhaust outlet prevents oil contamination in the 

air exhaust

SPECIFICATIONS

•  No. of Stages: 2
•  Free Air Displacement: 1.5 CFM
•  Motor: DC 18V, 90 W
•  Ultimate Vacuum: 15 microns/3 Pa
•  Oil Capacity: 3.5 oz.
•  Dimensions without battery: 9.9 x 3.7 x 6.1”
•  Net Weight: 7.9 lb

EACH VACUUM PUMP HAS BEEN FACTORY TESTED FOR CFM AND MICRON PERFORMANCE

Do not attempt to operate without using oil!
Use oil specfically refined for deep vacuum pumps
Use of oil not refined for deep vacuum pumps and or operating with contaminated oil will void warranty

Summary of Contents for 90058

Page 1: ... with extremely high ultimate vacuum and low noise Accessible oil drain port sight glass make both oil maintenance and accuracy easy Built in device eliminates oil mist and an oil gas separator at the air exhaust outlet prevents oil contamination in the air exhaust SPECIFICATIONS No of Stages 2 Free Air Displacement 1 5 CFM Motor DC 18V 90 W Ultimate Vacuum 15 microns 3 Pa Oil Capacity 3 5 oz Dime...

Page 2: ...s gases WARNING Do not evacuate gases that corrode metal or react chemically with pump oil CAUTION The temperature of evacuated gas shall not exceed 176 F 80 C and ambient temperature shall be 41 140 F 5 60 C WARNING No not touch the vacuum pump s hot surface during operation WARNING Do not block air outlet INITIAL PREPARATION Fully charge the 18VDC Li ion battery OIL FILL CAUTION DO NOT RUN THIS ...

Page 3: ...l VPOQ VPOP VPOG The oil provided with the pump has been specially blended to maintain maximum viscosity at normal running temperatures as well as cold weather starts In order to reach the deep vacuum required your vacuum pump needs clean moisture free oil during evacuation Dirty oil becomes a mixture of corrosive acids and water that effects the pump s ability to pull a deep vacuum Left sitting i...

Page 4: ...ation number will not be accepted In your fax include your NAME ADDRESS and PHONE NUMBER along with a detailed explanation of the problem We will contact you i e your phone number to discuss your problem and determine if you have to return your pump If you have to return your pump we will issue you an RMA Then please follow the instructions below Drain oil cap all ports and place tape over the cap...

Reviews: