Masterbuilt GF34G1M Instruction Sheet Download Page 1

Page: 1 / 4

Control Panel GF34G1M

Control Panel Instruction Sheet

• Make sure your fryer has fully cooled to avoid burns.
• Some components may have sharp edges. Use caution to avoid injury.

CAUTION

Manual Code: 9802190009 210510-GH

Tools Needed: 10mm Allen Wrench, Crescent
Wrench, and Phillips Head Screw Driver.

For valve removal, use 10mm Allen Wrench on the
inside of the pot.

Some models have an access panel that makes valve removal unnecessary.
Remove the access panel above the valve and go to step 5.

Summary of Contents for GF34G1M

Page 1: ...s Use caution to avoid injury CAUTION Manual Code 9802190009 210510 GH Tools Needed 10mm Allen Wrench Crescent Wrench and Phillips Head Screw Driver 1 2 For valve removal use 10mm Allen Wrench on the inside of the pot Some models have an access panel that makes valve removal unnecessary Remove the access panel above the valve and go to step 5 ...

Page 2: ...For spicket removal use Cresent Wrench on the outside of valve Remove the valve Remove eight 8 Screws from the oil pot Remove oil capillary 3 4 5 6 Remove oil capillary from the pot Remove the pot 7 8 ...

Page 3: ... 10 11 12 INSTALLATION Follow steps in reverse order 12 2 Replace the control panel with 4 Screws see step 12 Plug in the wire to the ignitor see step 11 Screw in the 4 Screws that hold the bracket see step 10 Return the fryer to upright position Install the pot Install the oil capillary see steps 6 7 Secure the oil pot with 8 Screws see step 5 Replace the valve see steps 2 4 ...

Page 4: ... là pour vous aider Tenga la seguridad de que estamos aquí para ayudarle Customer Service Service à la clientèle Servicio de atención al cliente masterbuilt masterbuilt com masterbuilt com contact us masterbuilt com warranty masterbuilt com collections parts ...