Installation & Operation Manual | MI-HORIZON3D
©
MASTERIMAGE 3D, Inc.
49
12.1.
Ethernet Automation
This section covers the requirements for Ethernet automation in detail and explains the
process for the writing of macros for commonly found digital cinema servers in the
market.
If you require detailed information on other forms of automation control please contact
MasterImage at
12.1.1.
Doremi Server
1. Within the server menu, open Device Manager (Menu > DTS Digital Cinema > Device
Manager)
2. Click the
Add
button and the list of devices will display
(shown right).
3. Select the
Raw
option to create MasterImage as a known
device in the server
’s listing.
4. Complete the fields as shown below. Ensure the settings
entered match those of the MI-HORIZON3D for IP
Address and Port Number. Check the
Enabled
box and
save the entry.
Attempt these steps only if you are familiar with server configuration settings. If you are
unsure of the processes involved, please contact the respective manufacturer of your
equipment for further information.
