User Manual |
MI-CLARITY3D SA
User Manual |
MI-CLARITY3D
User Manual |
MI-CLARITY3D
©
MASTERIMAGE 3D, Inc.
61
12. Firmware Upgrading Process for MI-CLARITY3D Series
Note:
The latest firmware and associated utility tools can be downloaded from the
MasterImage FTP site:
L: mi3dguest1
P: M!3DuploadASIA
The current system firmware version can be seen on the LCD display when the
system is in Standby.
12.1.
Download and Install the Upgrading Utility Tools
Download the firmware upgrading utility and virtual COM port driver from the following
URL:
⇒
http://www.st.com/internet/mcu/product/164495.jsp
1. Execute the VCPDriver executable file downloaded from the ftp site to install the
virtual COM port driver, following the on-screen instructions to complete the process.
2. Execute the DfuSe_Demo executable file downloaded from the ftp site to install the
DfuSe Demo utility program, following the on-screen instructions to complete the
process.
12.2.
Upgrade Firmware of MI-CLARITY3D
1. Connect between the MI-CLARITY3D and your PC using a USB cable.
2. Push and hold the MI-CLARITY3D
POWER
button to turn off the system power.
3. Push and hold the
ENTER
key and push the
POWER
button to change the system
to the DFU (Device Firmware Upgrade) mode. The screen shown below will display
on the MI-CLARITY3D.
4. Execute DfuSe Demo utility by double clicking the
icon on your PC desktop.
5. Click the
Choose
button to open the pre-downloaded firmware file.
