25
OPERATING INSTRUCTIONS
6. Turn the top knob of the fuel supply cylinder
counterclockwise two (2) rotations to open.
7. Apply the soap solution to connections of the
fuel supply assembly. Spoon leak check
solution at all: ”X” locations (see Fig. 7).
If no soap bubbles appear, there is no gas
leak. If bubbles form at the connections, a leak
is detected. If a leak is detected, immediately
turn off the gas supply, tighten any leaking
fittings, turn gas on, and repeat steps 5-6.
8. Turn off the knob on the fuel supply cylinder.
9. Turn on the burner control knobs for a moment to release the pressure in the hose, then turn
the control knobs back off.
10. Wash off soapy solution with cold water and towel dry.
Check all gas supply fittings before each use and each time, make sure the gas supply
cylinder is connected to the regulator. Have a qualified service technician to replace the grill
leak parts if any time need.
Also it is recommended to perform a leak test at least once a year whether or not the L.P.
gas supply cylinder has been disconnected.
7
