Standard Accessories
07
08
Users manual × 1
Tester probes (about 3 m)
(red, black, blue) 1 for each
LR14 alkaline battery × 6
Data analysis Software × 1
Temp. sensor × 1
USB cable × 1
Crocodile clip (red, black, blue)
1 for each
Danger
Safety Instructions
The High-Voltage Insulation Tester has been designed according to the safety standards of EN61010-1, EN61010-2-030,
CAT III 1000V, CAT IV 600V and pollution 2. Please read this manual carefully before use. If the equipment is used in a
manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Nevertheless,
improper handling during use may still cause damages to the tester and accidents in which physical injury might occur. Our
company is not liable for any accident involving physical injury that is caused by reasons other than flaws of the testing
instrument itself.
Safety Symbol Descriptions
This manual contains basic points of operation safety and tester maintenance. Please read the following safety information
carefully before use.
Table 1: Safety Information
Caution, risk of danger
Equipment protected throughout by DOUBLE INSULATION or REINFORCED INSULATION
CAT III
CAT IV
Caution, risk of electric shock
Direct current
Alternating current
MEASUREMENT CATEGORY III is applicable to test and measuring circuits connected to the
distribution part of the building’s low-voltage MAINS installation.
MEASUREMENT CATEGORY IV is applicable to test and measuring circuits connected at the
source of the building’s low-voltage MAINS installation.
Complies with European(EU) safety standards
