Massimo T-BOSS 410, Owner'S/Operator'S Manual, Page: 96 / 125

T-Boss410
OWNER’S/OPERATOR’S MANUAL 18.0
16. MAINTENANCE
16- 13
WARNING
Once a bottle of brake fluid is opened, use what is necessary and
discard the rest. Do not store or use a partial bottle of brake fluid.
Brake fluid is hygroscopic, meaning it rapidly absorbs moisture from the
air. This causes the boiling temperature of the brake fluid to drop, which
can lead to early brake fade and the possibility of serious injury.
The front brake is hydraulic disc brakes which is depressing the brake
pedal. These brakes are self-adjusting and require no adjustment.
The following checks are recommended to keep the brake system in
good operating condition. How often they need checking depends upon
the type of driving that has been done.

Keep fluid level in the master cylinder reservoirs as described see
“7.Control and part functions”. Normal functioning of the diaphragm is to
extend into the reservoir as fluid lever drops. If the fluid lever is low and
the diaphragm is not extended, a leak is indicated and the diaphragm
should be replaced. Always fill the reservoir as indicated whenever the
cover is loosened or removed to insure proper diaphragm operation.
Use DOT 3 brake fluid.

Check brake system for fluid leaks.

Check brake for excessive travel
or spongy feel.

Check friction pads for wear,
damage and loosened.

Check security and surface
condition of the disc.

Pads should be changed when
friction material is worn to 3/64”(1mm).(A)