1 - 9
INTRODUCTION
Tractor identification and technical specifications
2-4 Clutch specifications
Manufacturer
LX (OX)
Type
Single-plate (with hydraulic PTO)
Double-plate (with mechanical PTO)
Dimensions
11" (280 mm.) Single-plate (MF 2210-2225)
11" (245/280 mm.) Double-plate (MF 2210-2225)
12" (304.8 mm.) Single-plate (MF 2235)
12"/11 (304.8/880 mm.) Double-plate (MF 2235)
Material
Gearshift plate with 5 cerametallic plaques
Organic PTO plate
2-5 Transmission specifications
Manufacturer
Massey Ferguson
Gearbox
Speeds
Four synchronized speeds with infinitely meshed
helical gears
Type of reduction ranges
Three forward ranges (Slow-Normal-Fast)
Creeper (7.333 reduction).
Reverse shuttle
Synchronized on gearbox input
Number of speeds
12 forward and 12 reverse speeds with standard gearbox
15 forward and 15 reverse speeds with optional
24 forward and 24 reverse speeds with creeper
30 forward and 30 reverse speeds with optional gearbox
48/60 forward and 48/60 reverse speeds with Hi-Lo
Rear axle
Bevel gear pair
9/37 with helical toothing, Gleason type (MF 2210)
11/41 with helical toothing, Gleason type (MF 2225-2235)
Final reduction
Straight-tooth type with 10/51 or 11/49 ratios (MF 2210)
or 11/62 ratio (MF 2225-2235)
Total reduction ratio
23.23 or 20.29
Type of Differential
With two planetaries
Differential lock
With mechanical or electrohydraulic control,
mechanically engaged
Disengaged by means of the brakes (electrohydraulic control)
Rear brakes
Type
Oil cooled multiple-plate type
Number of friction disks
8 (4 each side)
Friction disk material
Graphitized resin
Disk diameter
166x110 mm
Total braking area
1900 cm
2
Diameter of braking cylinder
25.4 mm
Parking brake
Mechanical, engaged by a hand lever
Rear brakes (4WD axle)
Type
Oil colled multiple plate
Number of friction disks
8 (2 each side)
Friction disk material
Graphitized resin
Disk diameter
143x91 mm
Total braking area
764.5 cm
2
