11
User’s Guide
Level Control
Each band’s gain can be adjusted within a range of +18 dB and
–18 dB. There are a few ways of changing the level:
• Click and drag up or down on the band’s
Level
control.
• Click and drag up or down in the graphical EQ display
within the band’s region (see note below).
• Right click and drag in the EQ display to change the
level and Q.
Frequency Control
Each band’s center frequency can be set between 16 Hz and
21.5 kHz.
• Click and drag up or down on the band’s
Freq
control.
• Click and drag horizontally in the MDW’s EQ display.
Note:
Note:
Note:
Note:
Note: Each band can extend beyond it’s assigned region. If you have
moved the band outside it’s region, you must still drag the mouse
cursor from within the band’s boundary markers in the display.
EQ Band A
Band
Boundary
Markers
Frequency
Control
Q Control
Level
Control
Frequency
Region for
Band A
You can change the level and center frequency by
dragging the mouse over the graph.
