www.masimo.com
35
Masimo
Bluetooth Operation
The Radius PCG Bluetooth provides a Bluetooth Low Energy (LE) wireless option to allow the transfer of data to a
paired device. The paired connection only allows the Radius PCG to communicate to a single device at a time to
minimize the risk of unauthorized data access.
To prevent unauthorized data communication, the Bluetooth is disabled by default and must be enabled each time by
the user. The unique Bluetooth address contains the product name plus the serial number of the device. Confirm the
correct connection by verifying the appropriate serial number is displayed on the paired device.
When the Bluetooth is enabled, the Bluetooth indicator will appear on the screen to allow confirmation that the
Bluetooth is active. Disable the Bluetooth to stop or prevent authorized communication of data.
Once Bluetooth is enabled on Radius PCG, refer to the User Manual for the device for pairing instructions. To pair
Radius PCG to Root, follow the procedure in
Pairing Radius PCG to Root
on page 67.
If you experience interruption or reduction in the Quality of Service (QoS) of the Bluetooth communication, latency’s in
data communication greater than 30s, verify that both paired devices are in line of sight of one another and decrease
the separation distance, if possible.
Note:
Radius PCG uses a proprietary Bluetooth protocol. This helps to ensure that data is only communicated with
Masimo authorized device (e.g., Root).
