www.masimo.com
103
Masimo
Chapter 5: Profiles
The following chapter contains information about profiles and profile settings.
Profiles Overview
Note:
When in Sleep Study mode or optional Home mode (when available),
Profiles
settings
are not available. The device operates in the profile set during
Continuous Monitoring
mode.
See
Sleep Study
on page 90 and
Home
on page 89.
Rad-97 contains a
Profiles
screen which lets the user customize settings for different patient
populations:
•
Adult
Adult profile is the factory default profile. Displays in the Status bar as
ADULT
and
the color of the Profile button turns Blue.
•
Pediatric
Displays in the Status bar as
PEDIATRIC
and the color of the Profile button turns
Green.
•
Neonatal
Displays in the Status bar as
NEO
and the color of the Profile button turns Pink.
If the Profile setting is changed to
NEO
, Rad-97 will remain in the previously selected Profile
setting even after the device is powered off and on again.
Note:
If no changes are made to the profile settings, Rad-97 automatically resets to the
default
Adult
profile after the device is powered off and on again.
The active profile displays in the Status Bar. In the following example, the
Adult
profile is
active.
To restore all Rad-97 settings to factory default settings, see
Access Control
on page 94.
Changing Profiles
Changing Profiles is done through the
Profiles Setting
s screen. There are different ways to
access the
Profiles Settings
screen.
•
Touch the
Profiles
shortcut in the Status Bar, as shown below.
