Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual
Page 142 of 195
Page 142 of 195
User can check the ntp statistics output of current running date by selecting option “Show Graph of
Current date”. As the ntp statistics of current data is not complete, the same time scale will be shown till
the data is recorded. If user wants to check the statistics of previous 10 days, user can select the date in
field “Date of Logfile” and then “Show Graph” option. Please refer below figure
Figure 11-9 NTP Server Statistics plot on Webserver
User can also download the plotted Graph in jpg or png or pdf format by selecting option on right side
corner of graph as shown in below figure.
11.3.4 NTP Client Synchronization:
mas
TER
T-Sync
Model MTS200 NTP output port can be used to synchronize of Windows PC or
Unix/Linux based PC in networks. Please refer
Appendix C
for procedure/settings for making PC to
operate as NTP client. It is recommended to visit website
for installing and configuring
Unix/Linux based PC as NTP client.
To making Unix/Linux based PC as NTP client with IPv6 address user has to use global Ipv6 address.
Add below lines in the respected file
server fdc2:7142:77b7:0:1eba:8cff:fee5:c115 minpoll 4 maxpoll 4
Note
: Link local Ipv6 address cannot be used for NTP time synchronization.
