User Manual
45
40005E (Enhanced Bargraph Indicator)
REF NO: m42B/om/101
Issue No:02
4)
Periodic Log time is settable in HH:MM:SS format. By default it is 00:00:01.
5)
RTC related parameters are for setting date and time in Data logging.
3 ) Calibration Mode :
By Pressing MENU key, CHANNEL window shows
Cal
(CAL) message. By pressing MENU key
again , CHANNEL window shows
pWd
(PWD) message(if and only if password is set other than
zero, otherwise it will enter into sub menu). Press MENU Key to enter into edit mode of password
and then press INCREMENT key or DECREMENT key to modify the password and then press
MENU Key to enter into Calibration Mode. CHANNEL window shows
Amb
(Amb) message. By
pressing MENU Key, CHANNEL window shows current Ambient Value. Then use MENU Key to
enter into editing mode and use INCREMENT and DECREMENT key to modify value if required.
OR press ESCAPE key and then INCREMENT key to go to next parameter
Cal.z
(CAL.Z).
Channelwise Calibration can be used here. However, there is no need of channelwise calibration.
ESCAPE KEY is used to come out of CAL.Z(sub parameter of Calibration mode).
Table 22 Calibration Mode Parameters
Calibration Mode
Channel
Window
Name
Setting name and description
Default
value
Shows only if
Symbol
PWD
Password
Asking for Password
0
Password is
other than zero
PWD
0
Calibration Mode
Password
0 to 9999
0
Password is
other than zero
0
Amb
Ambient Calibration
Ambient Adjustment
-
-
(Amb)
Cal.z
Thermocouple, Rtd
and Linear Zero
Calibtriaon
Depending on PV sensor type
selected (1 and 2 Channels)
-
-
(CAL.Z)
Cal.s
Thermocouple, Rtd
and Linear Span
Calibtriaon
Depending on PV sensor type
selected (1 and 2 Channels)
-
-
(CAL.S)
rtr.z
Retransmission
voltage and current
Zero calibration
Depending on Retrasmission
type selected
(1 and 2 Retransmission
Outputs)
(Optional)
-
-
(rtr.Z)
rtr.s
Retransmission
voltage and current
Span calibration
Depending on Retrasmission
type selected
(1 and 2 Retransmission
Outputs)
(Optional)
-
-
(rtr.S)
4 ) Security Mode :
By Pressing MENU key, CHANNEL window shows
sCr.t
(SCr.t) message. By pressing MENU
key again , CHANNEL window shows
pWd
(PWD) message(if and only if password is set other
than zero, otherwise it will enter into sub menu). Press MENU Key to enter into edit mode of
password and then press INCREMENT key or DECREMENT key to modify the password and
then press MENU Key to enter into Security Mode. CHANNEL window shows
Pr.md
(Pr.md)
message. By pressing MENU Key, CHANNEL window shows current password for Program
mode menu. Then use MENU Key to enter into editing mode and use INCREMENT and
