Mash 50cc X-RIDE User Manual Download Page 6

10

11

Back to summary

This user’s manual describes the standard and safety method as well as basic 

maintenance. Read it carefully.

The images and illustrations in this manual may differ from those of your vehicle, if 

it is not the same model. The vehicle is designed for 2 people (driver included). 

 Caution

Do not use poor quality fuel.

Using poor quality fuel can cause deposits in the tank, which could block the 

fuel line and cause engine start-up failures or even serious engine damage.

Do not use inferior or poor quality motor oil. Always use a good quality engine 

oil to ensure engine performance and longevity. Any problem that appears due to 

the improper use of oil or gasoline cannot be covered by the warranty. 

Protective Clothing

• 

 

Appropriate regulatory protective clothing, such as an approved helmet with 

a protective mask, approved gloves, high boots, must be worn while driving to 

ensure your personal safety.

• 

Loose clothing is not suitable for riding a motorcycle as it can get caught in the 

control levers, kickstarter, footrest or wheel.

• 

Always wear an approved helmet, approved gloves, high boots, a jacket.

• 

Drive carefully while always respecting the highway code

• 

Beware of the silencer which can be hot while driving.

• 

Always wear clothing that covers the whole body.

• 

The above instructions are also intended for the passenger. 

Preparation before use

• 

Read the user manual carefully

• 

Maintain and check the vehicle before using it

 It is necessary to have the driving license corresponding to your vehicle and that 

it is insured

• 

Keep the engine off and away from any source of heat

•  

There are harmful substances such as carbon dioxide in the exhaust gases, 

always start the engine in a ventilated area

• 

Always wear an approved helmet, approved gloves, high boots, a jacket.

•  

Many traffic accidents between cars and motorcycles happen because the 

drivers do not see the bikers: always be vigilant!

• 

Make sure you are always visible to avoid accidents caused by others

• 

Wear bright or reflective clothing

• Always drive in the line of sight of other road users. Do not stay in the blind 

spot

 Be particularly careful when approaching intersections. Always anticipate the 

reactions of other road users. 

 Caution

•  Not wearing a helmet increases the probability of fatal hurts in an accident

•  Make sure the passenger always wears a full face helmet and protective 

clothing.

•  Not to be in an abnormal state, anxious or excited. The driver’s actions are 

very important for safe driving. Always sit in the middle of the saddle and 

especially not sit on the back of the saddle, this will lighten the weight in the 

front and cause the handles to shake.

• The passenger must hold the pilot and put his feet on the rear footrests.

• To turn, point your body to the side where you turn, otherwise it can be 

dangerous.

• Driving on a winding and uneven road means that you absolutely must 

respect the safety instructions.

•Driving on a winding and uneven road involves halving the speed, relaxing 

the shoulders and waist and squeezing the handles.

• To drive, you must squeeze the handles with both hands, do not try to lift the 

front wheel, this facilitates overturning and causes serious accidents. 

II - User Instruction

Summary of Contents for 50cc X-RIDE




























Reviews: