Maserati MC20 2022, Owner'S Manual

Page: 140 / 288

4
136
Instruments and Controls
• ParkSense Front Sensors Active in
Drive
If this function is active, when driver
moves from P (Park) or N (Neutral)
to D (Drive) mode, front parking
sensors are activated. If this function
is not active, when driver moves
from P (Park) or N (Neutral) to D
(Drive), front parking sensors are NOT
activated.
• ParkSense Volume
When this function is selected, the
chime volume of front and rear
park assist sensors can be set to
"Low", "Medium" or "High" level.
“Medium” is the default setting.
The system will retain its last known
configuration state through ignition
cycles.
• Blind Spot Alert
Activating this function the system
will try to prevent collision between
host vehicle and potential blind spot
collision hazard.
This function can be set in “Off”,
“Lights” or “ Chime”.
See Blind Spot Assist - BSA” in section
“Starting and Driving” for more
details.
Clock & Date
Time is always visible in digital format
on the instrument cluster and on the
MIA display.
With this function it is possible to view
and set the following modes.
•
Sync Time with GPS
Time is normally automatically
synchronised with the radio signal.
It is also possible to set automatic
synchronisation mode using GPS
signal instead.
• Set Time Hours
With "Sync Time with GPS" function
unchecked and this mode selected,
you can set the hours manually from
0 to 23. To select, touch the "+" or
"
–
" soft-keys to adjust the hours.
• Set Time Minutes
With "Sync with GPS Time" function
unchecked and this mode selected,
you can set the minutes manually
from 0 to 59. To select, touch the
"+" or "
–
" soft-keys as done for the
hours.
• Time Format
When in this mode, you can select
the time format display. To change
the current setting, touch and release
the "12 Hrs" or "24 Hrs" soft-key.
• Show Time In Status Bar
This function will allow you to turn
on or shut off the digital clock in the
upper status bar.
• Set Date (in Cluster)
When in this mode, you can
set the date manually on the
instrument cluster display. You
can choose between three
formats: "Day/Month/Year",
"Month/Day/Year" or