Maserati MC20 2022, Owner'S Manual

Page: 110 / 288

4
106
Instruments and Controls
Controls to Set and
Configure the Instrument
Cluster
The basic configuration of the
instrument cluster depends on the
driving mode set on the selector of the
central tunnel (see “Drive Mode” in
section “Starting and Driving”).
The user can then interact with the
instrument cluster by moving some
areas of the central sector, switch
between the parameters that can be
displayed in the customizable areas
and other functions.
These operations can be performed
through the buttons located at the
end of the multifunction levers behind
the steering wheel.
MENU Button on Left
Multifunction Lever
This button allows you to navigate
inside the different environments of
the left side of the screen.
The transition from one screen to the
other is done when the button is
released.
When the instrument cluster displays
the Trip screen, the long press of
this button performs the reset of
some of the displayed Trip values (see
“Instrument Cluster Contents” in this
section).
When the instrument cluster displays
the navigation information/Compass,
the long press of this button manages
the map visualization.
When in CORSA drive mode, this
button becomes the chrono control
(see “Drive Mode” in section “Starting
and Driving).
VIEW Button on Right
multifunction Lever
This button allows you to navigate
inside the different environments of
the right side of the screen.
The transition from one screen to the
other is done when the button is
released.
This button can be used to dismiss
a system message (see “Instrument
Cluster Contents” in this section).
Screens Transition
On the left and right areas of the
central sector shown in picture you
can view different environments
plus an empty configuration. The
switching between these screens is
performed acting on the MENU and
VIEW buttons located at the end of
the multifunction levers.