5 Functions and settings
TAPCON
®
-trol
2226817/00 EN
© Maschinenfabrik Reinhausen 2009
76
5.4.2
Parameters
Once you have selected a parameter group, the parameters belonging to this
group appear in the table display. You can change the parameter selected by
double-clicking or using the "Change parameters..." button.
The parameters can only be changed in line with their specification (e.g. min.
max). These parameter limits are checked during input.
The "All parameters" item also allows the parameter values saved in the groups
to be displayed in one common list.
Figure 59
Dialog box - change parameters
Checks are not undertaken within the visualization to establish whether the
parameters are correct for the particular system configuration. The values
may only vary within the stated limits. The entries are monitored, i.e. an error
message is produced if the current value entered is not in the defined range.
All further actions, other than a correction, are prohibited.
