© Maschinenfabrik Reinhausen 2009
2226817/00 EN
TAPCON
®
-trol
5 Functions and settings
75
5.4.1
Parameter groups
Just as you can change parameters on the device itself, the visualization also
allows you to do this. The structure in which the parameters are displayed is
based on the device-specific guidelines.
The main and sub-groups of the parameters can be selected using the function
tree and group table. These parameter groups are adopted when reading out
device data and basically correspond to the division of groups within devices.
If you select a main group entry, the associated parameter groups are displayed
in the table area on the right-hand side.
Figure 58
Groups, main and sub-groups of parameters
1
Function tree
2
Device-specific details
3
Table showing parameter groups and parameters
1
2
3
