Marvelmind IA-04-2D-Badge, Operating Manual, Page: 53 / 263

53
3.6.6. Industrial Super-Beacon Metal-25kHz
Do not disassemble the Industrial beacons. Otherwise, warranty will be lost
-
Supports dual-use
– RX and TX beacon.
It can transmit on its native ultrasonic
frequency (25kHz) and it can receive on
any
ultrasonic frequency via an
embedded RX sensor
– like Industrial-
RX or Mini-RX does. Effectively, the
Industrial
Super-Beacons beacons
combines inside an Industrial-TX and
Industrial-RX. Additionally, the beacon
supports both AI and NIA architectures.
Thus, it is called Industrial Super-
Beacon
-
Electronics is IP67 protected
-
Special IP67-protected 25-kHz transducers
-
External antenna with SMA connector for extended radio range
-
Corresponding IP67 connectors (male part) included
-
No battery inside
-
Extended working temperature range from -40°C to +50°C (not tested, provided by
design)
-
Embedded reset switch and DFU switch
– magnetic control
-
Two IP67 external connectors:
-
Modification (After April 2022)
-
Version 3 of Industrial RX (from April 2022) supports ONLY +5V power supply
. Don’t
use +12V power supply converter for this version, it will burn the beacon!
-
This version doesn’t have UART RX, but now is possible to use Interface connector as a
power supply.
-
RS485 modification pinouts
-
Can work together with modems with corresponding radio (radio bands must match)
-
Can work with any Mini-RX beacon or Beacon HW v4.9 with 25kHz ultrasonic
sensors (radio bands must match)
+5V in (3)
+5V in (5)