Marvelmind IA-04-2D-Badge Operating Manual Download Page 50

Page: 50 / 263

3.6.5.

Beacon Industrial-RX

Do not disassemble the Industrial beacons. Otherwise, warranty will be lost

RX-only

beacon

– can receive

ultrasonic, but can’t transmit it

Electronics is IP67 protected

Special IP67-membrane for ultrasonic
sensor

External antenna with SMA connector
for extended radio range

Corresponding IP67 connectors (male
part) included

No battery inside by default

– external

power bank or external power supply (+12V or +5V). But, optional variant with
internal battery is possible

(except version from April 2022, it supports only +5V

power supply)

Two IP67 external connectors:

Modification

(After April 2022)

Version 3 of Industrial RX (from April 2022)

supports ONLY +5V power supply

Don’t use +12V power supply converter for this version, it will burn the beacon!

This version doesn’t have UART RX, but now is possible to use Interface connector
as a power supply.

RS485 modification pinouts

(After Sep.2019)

+5V in (3)

+5V in (5)

Summary of Contents for IA-04-2D-Badge








































































































































































































































































Search results

Summary of Contents for IA-04-2D-Badge

Reviews:

Related manuals for IA-04-2D-Badge

Brands by name

Popular brands

Marvelmind IA-04-2D-Badge, Operating Manual

Search results

Summary of Contents for IA-04-2D-Badge

Reviews:

Related manuals for IA-04-2D-Badge

Brands by name

Popular brands