background image

Ordering  Replacement Parts 

Parts may be ordered online at 

partsformarvel.com 

O

r contact: 

www.marvelrefrigeration.com  (Servicers choose 

"

Login

"

 for 

service account). 
Phone  Number:  (

6

1

6

) 754-5

6

01 

NOTICE 

Use only genuine Marvel replacement parts. The 
use of non-Marvel parts can reduce performance, 
damage the unit, and void the warranty. 

Warranty parts will be shipped at no charge after 

M

arvel 

confirms warranty status. Please provide the model, serial 
number, part number and part description. Some parts will 
require color or voltage information.

M

arvel requires the return of original parts, we will inform 

you when the parts order is taken. This requirement will 
be noted on your packing list. A prepaid shipping label will 
be emailed to you. Please enclose a copy of the parts 
packing list and be sure the model and serial numbers are 
legible on the paperwork. Tag the part with the reported 
defect. 

Customers and non-authorized servicers may order non­

warranty parts at www.partsformarvel.com. Authorized 
servicers with a servicer login may order non-warranty 
parts at www.marvelrefrigeration.

com.

Ordering  Replacement  Parts 

17

Summary of Contents for MLWD224


























Reviews: