— 7 —
English
OPERATING INSTRUCTIONS
STARTING PROCEDURE
STEP #1)
Pump the "PRIMER BULB" under of the
carburetor until fuel can be seen flowing through
the "FUEL-RETURN LINE".
STEP #2)
Move the "CHOKE LEVER" fully up ward to the
closed position. If the engine is already warm,
only a partial or open (no choke) choke setting
may be required.
STEP #3)
Set the throttle lever at 1/2 speed.
CAUTION! Press down the "AIR FILTER COVER" and Pull
the "STARTER GRIP" briskly to start the engine.
NOTE: Only short pulls are necessary. Never pull the starter
cord to its fullest extension. Never let go of the starter grip until
it is at the fully returned position.
STEP #4)
Warming up the engine.
When the engine has started, slowly move the
"CHOKE LEVER" fully upward to the open
position. Allow the engine to "WARM-UP" at less
than 1/2 speed.
If a MARUYAMA engine fails to start after following the above procedures, contact an authorized
MARUYAMA dealer.
PRIMER
BULB
FUEL
RETURN
LINE
CHOKE
LEVER
CLOSE
OPEN
STARTER GRIP
HIGH SPEED
IDLE SPEED
STOP
OPEN