English
OPERATING INSTRUCTIONS
STARTING PROCEDURE
STEP #1) Pump the "PRIMER BULB" under of the
carburetor until fuel can be seen flowing
through the "FUEL-RETURN
LINE".
STEP #2) Move the "CHOKE LEVER" fully up ward to
the closed position. If the engine is already
warm, only a partial or open (no choke)
choke setting may be required.
STEP #3) Turn the stop switch ON. (Confirm that the
stop switch is at the starting position.)
STEP #4) Set the throttle lever at 1/2 speed.
CAUTION! Pull the "STARTER GRIP" briskly to start the
engine.
NOTE: Only short pulls are necessary. Never pull the
starter cord to its fullest extension. Never let go of the
starter grip until it is at the fully returned position.
PRIMER
BULB
FUEL
RETURN LIN
CHOKE-1---t--H,mrl'ih�IIII
LEVER
�()
���::::-
V
::
STOP
STARTER GRIP
(
(
(