English
OPERATING INSTRUCTIONS
STARTING PROCEDURE
STEP #1)
Pump the "PRIMER BULB" under of the
carburetor until fuel can be seen flowing
through the "FUEL-RETURN LINE".
STEP #2)
Move the "CHOKE LEVER" fully downward
to the closed position. If the engine is
already warm, only a partial or open (no
choke) choke setting may be required.
STEP #3) Turn the stop switch ON. (Confirm that the
stop switch is at the starting position.)
STEP #4) Set the throttle lever at 1/2 speed.
CAUTION! Pull the "STARTER GRIP" briskly to start the
engine.
NOTE: Only short pulls are necessary. Never pull the
starter cord to its fullest extension. Never let go of the
starter grip until it is at the fully returned position.
-11-
-·--�
�o
��0-"''::::
<:;:l
:.-:
STOP