Martin Maxedia 4, User Manual

Page: 42 / 202

35
© 2010 Martin Professional A/S
Maxedia 4
3D
3D Position
Belt Type Function
X fader Adjusts the horizontal position of the layer relative to the screen.
Y fader Adjusts the vertical position of the layer relative to the screen.
Z fader Adjusts the depth (how near or far from the camera) of the layer.
3D Position FX
The 3D Position FX let you set up a script that will adjust the X, Y, and/or Z position of the layer over
time as the cue runs. It also allows you to set the position to respond to the audio level.
Belt Type Function
Script multi position
switch Selects the type of scrip being run; Shake Vertical, Shake Horizontal, Shake
Depth, Scroll Vertical Linear, Scroll Horizontal Linear, Scroll Depth Linear,
Scroll Vertical, Scroll Horizontal, Scroll Depth, Jitter, Diagonal, Circle, Circle
Zoom or None.
Radius fader Sets the amount that the position is adjusted between it's highest and
lowest point in the script.
Speed 2 way fader Sets the speed at which the position is changed. A 50% value is equivalent
to no speed. As values increase from 50% speed will increase with
movement one direction. As values decrease from 50% speed will increase
with movement in the opposite direction.
Sound fader Sets the volume threshold at which sound will begin to effect the position.
X Shift fader When the Jitter script is selected, this fader sets the limit of the horizontal
movement in the script.
Y Shift fader When the Jitter script is selected, this fader sets the limit of the vertical
movement in the script.
Script Description
Shake layer will move from one side of the screen to the other and then reverse direction and
return.
Scroll Linear layer will move at a constant speed from one side of the screen to the other, then
begin again at the first side.
Scroll layer will move from one side of the frame to the other, slowing as it moves thru the
middle of the screen, then speeding back up as it moves off the screen, and then
begin again at the first side.
Jitter layer will move randomly vertically and horizontally between the limits set in X Shift
and Y Shift.
Diagonal layer will move diagonally across the screen. The Speed fader will set both speed
and direction.
Circle layer will move in a circle around the center point of the screen.
Circle Zoom layer will move in a circle around the center point of the screen, at the same time, it
will move away/towards the camera, until it disappears and then returns to the other
extreme Z value to continue.
3D Rotation
Belt Type Function
X 4 way fader 0-25% - Sets speed at which layer will rotate continuously counterclockwise thru
the x-axis.
25-50% - Sets indexed angle to which the layer is rotated counterclockwise thru
the x-axis.