Exploded view
7
4. Exploded view
5. Groundwork
This section describes how to install the Inground 200 either directly in the ground or in an
installation sleeve.
Warning!
All electrical system installation must be performed by qualified professionals.
It is the installer’s responsibility to ensure that all national safety regulations and
legal requirements are followed when installing the Inground 200.
Choosing a location
Safety
The Inground 200 must be installed in a location that meets the safety standards listed under
on page 5. It is the installer’s responsibility to ensure that all local safety regulations
and legal requirements are observed.
Trim ring
Front glass with seal
Lens
Lamp module
Connections compartment
Beam adjustment ring
Housing
Summary of Contents for Inground 200
Page 1: ...mar tinar chi te ctural Installation Guide Inground 200...
Page 4: ......
