Martin Audio MLA, User Manual

Page: 108 / 456

MLA System
USER GUIDE
MLA System
User Guide V2.1
108
…
…
…
…
Manually Configuring the Wireless Access Point (WAP)
1. Connect your computer and the Picostation that will be the Wireless Access Point (WAP) to the switch
2. Load the Ubiquiti Discovery tool, scan for the connected Picostation. Once found, double click on the Picostation, select
the IP address which isn’t 192.168.1.20 and click the Web UI button
3. The logon screen is then displayed in your web browser. Login using the following credentials:
Username – ubnt
Password – ubnt
4. Click on the Wireless tab and enter the following information:
Wireless Mode = Access Point
SSID = MLA System
Country Code = United Kingdom
Security = WEP
WEP Key = Enter a 10 digit hexadecimal combination
5. Click on the Network tab and enter the following information:
IP Address = 10.10.10.2
Netmask = 255.255.255.0
Gateway IP = 10.10.10.1
Primary DNS IP = 10.10.10.1
6. Click on the Change button at the bottom of the screen
7. Disconnect the WAP and the computer from the switch, wait 10 seconds for your computer to lose its network
connection, and then reconnect both
8. Load the Ubiquiti Discovery tool, scan for the connected Picostation. Once found, double click on the Picostation, select
the IP address which should now be 10.10.10.2 and click the Web UI button
9. The logon screen is then displayed in your web browser. Login using the following credentials:
Username – ubnt
Password – ubnt
10. Click on the System tab and enter the following information:
Device Name = MLA WAP
Administrator Username = admin
Current Password = ubnt
New Password = [Enter the same password used for the DHCP server]
Verify New Password = [Enter the same password used for the DHCP server]
11. Click the change button
The Wireless Access Point (WAP) has now been configured; they can be re-configured using the files installed on the tablet PC
Specification
Please note that as with most computer systems, specifications change extremely frequently so please contact Martin Audio if
you have any questions regarding the latest specification for production systems.
Processor
Intel® Core™ i7-2640M 2.9 GHz, 4MB L3, 1600Hz FSB
Operating System