1 INTRODUCTION
Thank you for purchasing a Martin Audio M2 system controller and ICT500
compact loudspeaker system. The M2 is used to optimise the performance
of the ICT500, whether it is used as a stand-alone system or with additional
sub-bass enclosures.
2
UNPACKING
Every Martin product is built to the highest standard and thoroughly
inspected before it leaves the factory. After unpacking the unit, examine it
carefully for any signs of transit damage and inform your dealer if any such
damage is found. It is suggested that you retain the original packaging so
that the unit can be repacked at a future date if necessary.
Please note that Martin Audio and its distributors cannot accept
responsibility for damage to any returned product through the use of non-
approved packaging.
Martin Audio – M2 and ICT500
E
NGLISH
2
This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC.
Standards Applied
EMC
Emission
EN55103-1:1996
Immunity
EN55103-2:1996
Electrical Safety
EN60065:1993 (ICT500)
EN60065:1998 (M2)
CONTENTS
<
>
GUIDES
