Blackline H3
+
Three-way bi-amp trapezoid Hybrid™
fully horn loaded
features
All-horn three-way system
‘Phase-ball’ loaded mid-driver
Hybrid™ LF section
Fitted with handles and castors
Five year limited warranty
applications
Larger club performance
Large scale installs
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2007 Martin Audio Ltd.
The Blackline H3+ is a very high performance, all-horn, three-way
system in a single, wide-bandwidth package. New drivers have
been developed for improved performance in all bands. The
Hybrid™ low frequency section comprises a horn-loaded 15”
(380mm)/4” (100mm) voice coil driver that is reflex loaded to
extend the LF output to below the natural cut-off point of the
horn. The new LF driver features a water resistant cone and triple
roll surround for increased excursion.
The mid-horn of the H3+ has a unique ‘phase-ball’ loading device
which maintains the constant directivity characteristics of the horn
at the upper end of its range. It is driven by a new 10” (250mm)
midrange driver with an aluminium demodulating ring for
improved high-mid clarity and reduced distortion when driven
hard. The 70˚ x 40˚ HF section of the H3+ features a
neodymium 1” (25mm) exit compression driver with a Kapton
diaphragm for high sensitivity and extended HF performance. The
internal mid/high passive crossover allows this three-way system
to be driven in a bi-amp configuration.
A Martin Audio M3+ or DX1 Electronic Controller is available to
provide H3+ crossover and limiter facilities.
www.martin-audio.com
overall dimensions
technical specifications
TYPE
Three-way bi-amp trapezoid Hybrid™ fully horn loaded
FREQUENCY RESPONSE (5) 50Hz-18kHz ± 3dB
DRIVERS
15” (380mm)/4” (100mm) voice coil bass driver
10” (250mm)/2.5” (63.5mm) voice coil mid driver
1” (25mm) exit HF compression driver
RATED POWER (2)
LF: 750W AES, 3000W peak
MF + HF: 300W AES, 1200W peak
RECOMMENDED AMPLIFIER LF: 400-1500W into 4 ohms
MF + HF: 400-800W into 4 ohms
SENSITIVITY (6)
LF: 104dB, MF + HF: 104dB
MAXIMUM SPL (7)
131dB continuous, 137dB peak
NOMINAL IMPEDANCE
LF: 8 ohms, MF + HF: 8 ohms
DISPERSION (-6dB)
70˚ horizontal, 40˚ vertical
CROSSOVER
200Hz active, 2kHz passive
ENCLOSURE
250 litre, multi-laminate birch ply
FINISH
Textured black paint
PROTECTIVE GRILLE
Black perforated steel
CONNECTORS
2 x Neutrik NL4
PIN CONNECTIONS
LF+,- : 1+,1-, (MF + HF) +,- : 2+,2-
FITTINGS
12 x M10 inserts
4 x 4” (100mm) castors, 4 x pocket handles
DIMENSIONS (inc wheels)
(W) 560mm x (H) 1066mm x (D) 780mm (911mm)
(W) 22ins x (H) 42ins x (D) 30.7ins (35.9ins)
WEIGHT
77.5kg (170.5lbs)
professional
