background image

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a. 

READ AND FOLLOW ALL 

   SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should 

always be followed, including the following:

b. Do not use seasonal products outdoors unless marked  

 suitable for indoor and outdoor use. When products are 

 used in outdoor applications, connect the product to a 

 Ground Fault Circuit Interrupting (GFCI) outlet. If one is 

 not provided, contact a qualified electrician for proper 

 installation.

c.  This seasonal product is not intended for permanent 

 installation or use.

d. Do not mount or place the product near gas or electric  

 heaters, fireplaces, candles, or other similar sources of 

 heat.

e. Do not secure the wiring of the product with staples or 

 nails, or place on sharp hooks or nails.

f.  Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when  

 retiring for the night, or if left unattended.

h. This is an electric product and not a toy! To avoid risk of  

 fire, burns, personal injury and electric shock it should not  

 be played with or placed where small children can reach it.

i.  Do not use this product for other than its intended use.
j.  Do not hang ornaments or other objects from cord, wire, 

or light string.

k. Do not close doors or windows on the product or exten 

sions cords as this may damage the wire insulation.

l.  Do not cover the product with cloth, paper, or any 
    material that is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not  

  twist lamps.

n. Read and follow all instructions that are on the product

     or provide with the product.

o. 

SAVE THESE INSTRUCTIONS.

Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand on 

               the floor.
Step 3. Slide the locking disk of the tree stand down until it 

               snaps into place.

Assembling the tree
This tree assmebles with Quick Set® technology

---Set up and light up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom 

              and insert the pole into the tree stand.
Step 2. Continue by inserting the upper tree section(s) to
              the lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working

              from the bottom to the top. When adjusting 

              branches, ensure that all wires are free of branch

              hinges.
Step 4. Insert the adaptor into the wall outlet. All your lights 

              should now be lit.
Step 5. When finished shaping the branches, slightly 

              upsweep all branch tips for a uniform look.

Assembly

Assembling the tree stand

Pre-Assembly

Package Contents

Part                        Description                                Quantity

A                        Tree top, tag 3                                   1
B                     Tree center, tag 2                                 1
C                    Tree bottom, tag 1                               1
D                           Tree stand                                        1

Section 3

Section 2

Section 1

Do Not Tamper

Internal Parts

Open the

protective

cover

Do Not Tamper

Internal Parts

Open the

protective

cover

Adaptor

To Be Plugged

Into Wall

Outlet

Christmas Tree

Model: TG76M5311L01

Sku # 722 619

Foot Pedal

on/off Switch

100S

50S

100S

50S

100S

50S

100S

Step 1. Grasp the power adapter or power cord plug, and than 

              unplug from the power outlet. Do not pull the power 

              cord.

LAMP REPLACEMENT

Step 2. Lift up lamp lock tab, then pull the 

              lamp and plastic lamp base straight 

              out of the lamp-holder.

Step 3. Replace with a new spare lamp 

            provided with this product.

( Reference figure only)

USER SERVICING INSTRUCTIONS

Reviews: