background image

6

Safety Symbols

The following table describes safety symbols that may appear on this product. Read, understand, and follow all instructions on 

the machine before attempting to assemble and operate.

 

It is obligatory at all times to wear 

goggles or a visor to protect the eyes 

and face.

Disconnect the plug before 

conducting maintenance or when it is 

damaged or tangled. 

Beware of stones and other objects 

that could be thrown from the 

appliance. Keep all bystanders and 

domestic animals a safe distance 

away from the work area.

Keep feet away from the moving 

parts of the snow thrower. The 

rotating parts can cause severe 

bodily injury.

Keep hands and feet away from 

the rotating parts.

Keep hands away from the moving 

parts of the snow thrower. The 

rotating parts can cause severe 

bodily injury.

The rotating part will continuously 

run for several seconds after you 

turn off the machine.

Double insulation.

Keep the flexible power supply cord 

away from the cutting blades.

Always keep the power cable away 

from heat sources, oils, or sharp 

edges. Immediately remove plug from 

the mains if the cable is damaged or 

entangled.

Symbols

 

 

  

Descriptions

Symbols

 

 

    

Descriptions

STOP

READ THE OPERATOR'S 

MANUAL(S) – 

Read, understand, 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – 

Indicates  

a precaution, a warning, or  

a danger.

WARNING!

 Do not expose the unit 

to rain or wet conditions. Keep dry.

Wear protective gloves and non-

slip footwear when using the 

machine and handling debris.

CAUTION! 

Beware of stones and 

other foreign objects that could 

be thrown from the appliance.

 

DANGER!

 Cutting/dismemberment 

hazard – Keep hands away from the 

rotating auger. Do not use hands to 

unclog rotor housing. Stop motor 

before removing debris.

Summary of Contents for MTS-EST22-RM





















Reviews: