MT84G User’s Manual V0.1
___________________________________________________________________________________
41
Raw
UNICODE
6.7 RF Message
Read Fail (RF) message is the message sent from MT84G to the host device
in the case of scanning failure.
6.7.1 Enable/Disable RF Message
Enable RF Message
Disable RF Message*
6.7.2 Set RF Message
Set RF Message
The RF message can be up to 15 bytes of data, with each data converted into
two-digit hex value during configuration. Please refer to Appendix C for ASCII
table and corresponding hex value.
Example: to set RF Message as ‘CODE’
1. Convert “CODE” into Hex equivalent as 43, 4F, 44, 45
2. Scan
Set RF Message
3. Scan
4
,
3
,
4
,
F
,
4
,
4
,
4
,
5
respectively from
8.1 Data 0~F
4. Scan
Save Configuration
from
8.2 Save & Abort
