Marshall Electronics V-R902DLW, Operating Instructions Manual

Page: 26 / 36

26
Wave/Vector Submenu
Use the Wave/Vector submenu to change the location of the Waveform Monitor and Vectorscope, as well as the data
displayed on the Waveform monitor or the Vectorscope on the V-R902DLW monitor. The Waveform Monitor can also be
customized to conform to different scales, to display different colors, differentiate data with Limits. The Vectorscope targets
can also be changed in this menu.
■
Waveform Mode
This option allows you to choose between different layouts for the Waveform monitor. Available options are YUV Parade,
YUV Overlay, RGB Parade and RGB Overlay.
• YUV Parade The Y (Luminance, shown in white), U and V (Chrominance components, U is showed in cyan and V is shown in
Magenta) components of the signal are displayed from left to right.
• YUV Overlay The YUV components of the signal are overlaid.