Marshall Electronics V-LCD90MD, Operating Instructions Manual

Page: 13 / 24

13
■
Marker Selection
Use this setting to adjust and view the settings of 1 of 2 available markers.
■
Presets
Use this setting to superimpose one of 13 markers on the screen or 1 custom setting. This setting is disabled when the Pixel-to-Pixel mode is enabled.
• Off (No Marker)
• 4:3 Aspect Ratio
• 13:9 Aspect Ratio
• 14:9 Aspect Ratio
• 16:9 Aspect Ratio
• 1.85:1 Aspect Ratio
• 2.35:1 Aspect Ratio
• 2.39:1 Aspect Ratio
• 95% Safe Area
• 93% Safe Area
• 90% Safe Area
• 88% Safe Area
• 85% Safe Area
• 80% Safe Area
• Custom
■
Customize
Use this setting to customize the screen markers by using the BRIGHT, COLOR, CONTRAST and USER knobs. These control the LEFT, RIGHT, TOP and BOTTOM edges,
respectively.
Each Marker (1 or 2) can be fully customized in this fashion.
■
Line Width
Use this setting to choose the width of the marker lines, from 1 px (thinnest) to 10 px (widest).
■
Line Color
Use this setting to select a custom color for the Screen Markers. You can choose between White (default), Yellow, Red, Green and Blue.
■
Transparency
Use this setting to select the transparency of the marker background. Choose between 0% (black) , 25%, 50%, 75% and 100% (see through) transparency.
Filters Submenu
Use the Filters Submenu to enable various modes.
Center Marker