18
On-Screen Menu (continued)
OSD CONFIGURATION SUBMENU (continued)
■
Status Display
Use this setting to enable or disable status display. When enabled, the current video input standard is displayed on the
top left of the screen. When disabled, status is only displayed for 2 seconds when the monitor is powered on, when an
input is applied, or when the input video standard changes. The status display reads “No Input” when no video input is
present.
■
Time Code
Use this setting to enable time code display on the screen. Time code is de-embedded from the vertical ancillary data
(VANC) within the SDI signal. Two types of time code can be selected to display on the screen:
LTC (linear time
code)
or
VITC (vertical interval time code)
.
The position of the time code display varies based on the aspect ratio setting and presence of IMD text
(see Aspect
Ratio diagrams on page 14).
Status Display
00:00:00:00
Time Code display
Hours
Minutes
Seconds
Frames
