Marshall Electronics
28
Descriptions of Major Functions
6.1 I would like to switch to CV620
1. Press
[Camera 1 ~ 3]
on the
remote control
to select CV620.
Camera 1 ~ 3 is selected with IR SELECT.
6.2 I would like to save the current lens position data
1. Hold
[ ID]
on the
remote control
to save the current position
data.
ID shall be a digit [0 ~ 9].
Use VISCA Command to save the position data to [0~127]
6.3 I would like to clear the saved position data
1. Hold
[Reset + ID]
on the
remote control
to clear the given position
data.
ID shall be a digit [0 ~ 9].
Use VISCA Command to clear the position data of [0~127]
6.4 I would like to turn on the back light compensation
function
1. Press
[Back Light]
on the
remote control
to turn on or turn off the back
light compensation
6.5 I would like to adjust the shooting angle of the lens
1. Press
[Tilt
]
or
[Tilt
]
on the
remote control
to adjust the angle
upward or downward.
2. Press
[Pan
]
or
[Pan
]
on the
remote control
to adjust the angle to
right or left.
3. Press
[Pan - Tilt Reset]
on the
remote control
to reset the angle to the
center point.
6.6 I would like to zoom in/out images
6.6.1 Adjust image size
1. Press
[Fast +]
on the
remote control
to zoom in images.
2. Press
[Fast -]
on the
remote control
to zoom out images.