V-R84P-SDI Instruction Sheet
Marshall
http://www.LCDRacks.com e-mail: [email protected]
Broadcast Multimedia Division
Although the V-R84P-SDI is a sophisticated blend of digital and analog technologies, its operation is fairly
straightforward. However, it is important to take note of the following:
1.
Because the V-R84P-SDI must resample and resize every incoming signal; when switching functions, it
may be necessary to wait up to 2 seconds for the unit to lock on to the selected function.
2.
Be certain not to apply any pressure on the LCD panels, they are fragile and can break. Scratched, cracked or
broken LCD screens are
not
covered by our warranty.
3.
The V-R84P-SDI uses 12VDC, 5.0amp regulated power. Be certain that these specifications are met when
using a power supply other than the one supplied to you by Marshall Electronics.
4.
The polarity configuration of the power connector is printed on the rear of the enclosure. Any battery operation
of the V-R84P-SDI must have this polarity configuration.
continued on back
8.4” LCD
Active Matrix 6.71” x 5.03”
0.213mm x
0.213mm
800H x 600V
1 comp, 1 SDI,
1VGA
300 cd/m²
8.87W x 6.91H
x 2.40D
12 VDC
5.0 Amps
Display
Viewing Area
Dot Pitch
Inputs
Brightness
Dimensions
Picture
Elements
Power
Consumption
The
V-R84P-SDI
uses a 8.4" active matrix
LCD panel with loop through capability.
This high-resolution panel has a pixel
count of 800x600 and is rated at a very
bright 350 candle luminance. The unit has
an SDI, S-video, Composite Video and a
VGA input with NTSC/PAL auto-recogni-
tion. This unit also has a built-in color bar
generator, controls for brightness, color,
tint, and contrast, and a selectable aspect
ratio of 16:9 or 4:3. A built in 3 color tally
system is also provided for added versatil-
ity. Unit comes complete with power sup-
ply and instruction sheet.
2.4”
www.LCDRacks.com
