marsden PT-700, User Manual, Page: 7 / 14

Page 7 of 14
Operation - Switching on the scale
•
Press and hold the PRINT/ON/OFF button for three seconds.
•
The display will show ‘0.00’ once the scale is ready to begin weighing.
Operation - Using Hold
•
If an unstable weight on the scale causes fluctuations in the weight display, press the HOLD button
and the indicator will ‘lock’ the weight of the item on the screen.
•
Press HOLD again to cancel the held weight reading.
Operation - Using Tare
•
You can remove the weight of the pallet by using the TARE function. Place the pallet only on the scale,
and press TARE.
•
Remove the pallet. The display will show the pallet’s weight as a minus number.
•
Add your palletized goods to the scale and the weight of the pallet will be removed.
•
Press GROSS and the display will show the full weight on the scale.
•
Press TARE again to cancel the tare weight.
Operation - Switching between kg and lb
•
To switch the scale from kg to lb, press LB/KG.
•
Press again to return to KG readings.
Operation - Using Zero
•
If at any time the indicator shows a reading when nothing is on the scale, press ZERO.
•
The display will then show a zero reading.
Operation - Using Accumulation
•
The accumulation function allows you to add up the weights of several pallets.
•
Add your first item to the scale and press TOTAL. Remove the pallet from the scale.
•
Add the next item to the scale and press TOTAL again.
•
If you would like to see the current total at any time, press and hold TOTAL for at least two
seconds.
•
To print the individual weights and a total, press PRINT/ON/OFF.
•
To clear accumulation readings press ZERO.
•
Press HOLD to return to normal weighing.