Tare and Preset Tare Functions
Press TARE for three seconds to enter
Preset Tare setting mode.
When the cursor
points to Pre Tare on the display press
TARE once more. The display will show the
last preset tare value entered.
The left digit on the display will flash. Enter
the preset tare value by using the numeric
keys, then press TARE again to confirm the
value.
The display will now show the figure you
entered deducted from 0.0kg. The scale is
now ready to use.
To use the Tare function, add the item you
wish to tare off to the scale, and press
TARE. The display will show zero, and then
a minus number when the item is removed
from the scale.
Page 12