Trawl Explorer | V5 | Servicing and Maintenance
Replacing Parts
Qualified Marport technicians can remove and replace the following parts if they are damaged.
Removing and Putting Back the Housing
You need to remove the housing and tube around the bottle to get access to the components inside
the bottle.
Before you begin
For this task you need the following tools:
11 mm
wrench
About this task
Only qualified Marport technicians can do this task.
Procedure
1.
Remove the housing.
1.
Remove the shackle holding the metal rod.
2.
Remove the metal rod blocking the bottle.
3.
Remove the bottle from the housing.
2.
Remove the tube around the bottle.
1.
Remove the retainer ring around the transducer.
2.
To remove the black tube around the bottle, place the
bottle in a vise or on the ground and pull out the black
tube.
You have now access to the electronic components.
3.
After completing maintenance procedures on the components, put back the tube.
64
